Hi guys.
I have a Sony TZ3 laptop, and I use FC17 x64. The Ricoh cardbus doesn't works.
[root@localhost dmitry]# uname -r
3.5.3-1.fc17.x86_64
[root@localhost dmitry]# lspci |grep Ricoh
09:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
09:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
09:04.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
[root@localhost dmitry]# dmesg |egrep -i 'card|ricoh|sdhc|mmc'
[ 0.057776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.057780] PCI: not using MMCONFIG
[ 0.069633] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.069919] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.168471] pci 0000:09:04.0: CardBus bridge to [bus 0a-0d]
[ 2.588141] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.797623] yenta_cardbus 0000:09:04.0: CardBus bridge found [104d:900e]
[ 2.919918] yenta_cardbus 0000:09:04.0: ISA IRQ mask 0x0cb8, PCI irq 20
[ 2.919928] yenta_cardbus 0000:09:04.0: Socket status: 30000006
[ 2.919950] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff]
[ 2.919957] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xfc100000-0xfc1fffff]
[ 2.919988] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 2.976140] firewire_ohci 0000:09:04.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 17.395845] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.396098] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 493.416599] yenta_cardbus 0000:09:04.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 493.416601] yenta_cardbus 0000:09:04.0: MMC cards are now supported by standard SDHCI controller
[ 8080.897589] sdhci: Secure Digital Host Controller Interface driver
[ 8080.897595] sdhci: Copyright(c) Pierre Ossman
[ 9636.494597] yenta_cardbus 0000:09:04.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 9636.494599] yenta_cardbus 0000:09:04.0: MMC cards are now supported by standard SDHCI controller
[12536.725555] yenta_cardbus 0000:09:04.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[12536.725557] yenta_cardbus 0000:09:04.0: MMC cards are now supported by standard SDHCI controller
I try to load module sdhci. But when I insert the card, nothing happen. I watch the /var/log/messages and nothing is printed when the card is inserted.
This hardware is not suported by Fedora 17?
I have a Sony TZ3 laptop, and I use FC17 x64. The Ricoh cardbus doesn't works.
[root@localhost dmitry]# uname -r
3.5.3-1.fc17.x86_64
[root@localhost dmitry]# lspci |grep Ricoh
09:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
09:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
09:04.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
[root@localhost dmitry]# dmesg |egrep -i 'card|ricoh|sdhc|mmc'
[ 0.057776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.057780] PCI: not using MMCONFIG
[ 0.069633] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.069919] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.168471] pci 0000:09:04.0: CardBus bridge to [bus 0a-0d]
[ 2.588141] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.797623] yenta_cardbus 0000:09:04.0: CardBus bridge found [104d:900e]
[ 2.919918] yenta_cardbus 0000:09:04.0: ISA IRQ mask 0x0cb8, PCI irq 20
[ 2.919928] yenta_cardbus 0000:09:04.0: Socket status: 30000006
[ 2.919950] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff]
[ 2.919957] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xfc100000-0xfc1fffff]
[ 2.919988] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 2.976140] firewire_ohci 0000:09:04.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 17.395845] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.396098] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 493.416599] yenta_cardbus 0000:09:04.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 493.416601] yenta_cardbus 0000:09:04.0: MMC cards are now supported by standard SDHCI controller
[ 8080.897589] sdhci: Secure Digital Host Controller Interface driver
[ 8080.897595] sdhci: Copyright(c) Pierre Ossman
[ 9636.494597] yenta_cardbus 0000:09:04.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 9636.494599] yenta_cardbus 0000:09:04.0: MMC cards are now supported by standard SDHCI controller
[12536.725555] yenta_cardbus 0000:09:04.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[12536.725557] yenta_cardbus 0000:09:04.0: MMC cards are now supported by standard SDHCI controller
I try to load module sdhci. But when I insert the card, nothing happen. I watch the /var/log/messages and nothing is printed when the card is inserted.
This hardware is not suported by Fedora 17?